Deutsch
English
Español
Français
Italiano
Português
Русский
中文
DC31
Flow-Through Chiller
Performance Characteristics
Flow-through Chillers are designed for simple, low demand cooling applications. They are commonly used in combination with heating circulators to remove heat in order to cool a process back to room temperature.
Functions overview
- Cooling of fluids
- Ideal for counter-cooling or as a replacement of cooling water
- Compact, space-saving construction
- Robust housing with carrying grips
- Environmetally friendly with natural refrigerant
Product impressions
| Temperature range | -30...50 |
| Safety class | I / NFL |
| Protection class | IP20 |
| Dimensions (W x D x H) | 250 x 310 x 415 mm |
| Weight, net | 23 kg |
| Cooling capacity |
|
||||||||
| Refrigeration machine | air-cooled, natural refrigerant | ||||||||
| Refrigerant 1st stage | R-290 (A3, H220) | ||||||||
| Refrigerant quantity 1st stage | 0,06 kg |
| Pump connection | M16x1 AG male |
| Pump speed adjustable | no |
| Pump characteristics | no pump |
| Permissible ambient temperature | 5...40 °C |
| Power supply | 220-240V 1~/2~ 50/60Hz |
| Current consumption max. | 2,7 |
Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C.
Please observe the notes on installation and/or the space requirements of our products.
The following voltage and frequency tolerances apply based on EN60034-1:
Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%
Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.
We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.
Accessories
Extension cable for temperature sensor
Holder for immersion coolers
Heat transfer fluid M90.055/170.02
Heat transfer fluid M90.055/170.02
Heat transfer fluid M80.100/250.03
Heat transfer fluid M80.100/250.03
Heat transfer fluid P20.225/275.50
Heat transfer fluid P20.225/275.50
Heat transfer fluid M20.195/235.20
Heat transfer fluid M20.195/235.20
Heat transfer fluid M40.165/220.10
Heat transfer fluid M40.165/220.10
Heat transfer fluid M60.115/200.05
Heat transfer fluid M60.115/200.05
Heat transfer fluid M80.055.03
Heat transfer fluid M80.055.03
Heat transfer fluid MEG
Heat transfer fluid MEG
Factory calibration certificate – temperature stability to DIN 12876
Testing protocol FAT (Final Acceptance Test
Factory calibration certificate – absolute accuracy