Software

Software for device control, visualisation and documentation
SpyLight®
 
        
SpyLight® is a software for visualisation and documentation of process-relevant data. Communication occurs over RS232, RS485 or TCP/IP. The installation is very simple. SpyLight® requires hardly any hard disk space and is very easy to use. The recorded data are displayed over a time axis. The axes of the diagram are freely scalable in the process. A zoom function simplifies the graphics evaluation of individual time sections.

Software SpyLight (English)
 
Software SpyLight (German)
 
     
     
     
SpyControl®
 
     
SpyControl® is based on SpyLight® but offers significantly more functionality. Installation and operation are virtually identical. SpyControl® can record up to 10 channels at the same time. Every data channel is independently documented and the graphical visualisation options are also freely configurable. Using SpyControl® the user can execute the following device functions for every active channel:

- nominal value specification
- change internal/process temperature control
- Start/Stop function

SpyControl® is also used if one of these maximum of ten devices should be controlled by a programmer. A temperature program can additionally be specified for a device which can then run automatically. The segments are entered in a user-friendly way over a graphical editor.

Software SpyControl Evaluation (English)
 
Software SpyControl Evaluation (German)

 
Patch SpyControl 1.25

Evaluation version, period of validity 30 days, 6.17 MB

 

     
     
     
Flash software for Pilot ONE
 
      
The software "Pilot ONE Flasher" makes it possible to add company updates to the Pilot ONE controller. A Windows PC with USB connection and a corresponding connection cable are required to run it. In addition, an Internet connection is required to download new firmware versions. The following installation packages include the software including the manual and USB driver (English and German). Two installation packages are available We recommend the version with a digital signature for the secure use of firmware files.

Pilot ONE Flasher with digital signature
    (recommended version)

 
Note: This software includes modules for the use of digital signatures. Please check if this is permissible in your country.
 
Pilot ONE Flasher without digital signature
 
Active-Board Flasher
 

 
     
     
     
Driver package for Pilot ONE
 
      
This software installs a virtual COM port on a Windows PC, which allows communication between a PC and Pilot ONE via the USB interface.

Pilot ONE driver package
 
Manual
  Diese Software installiert einen virtuellen COM-Port auf einem Windows-PC, der die Kommunikation zwischen PC und Pilot ONE über die USB-Schnittstelle ermöglicht. 
     
     
     
Driver packages for KISS / OLÉ
 
      
This software installs a virtual COM port on a Windows PC, which allows communication between a PC and Pilot ONE via the USB interface.

Driver download  (external Link)
  Diese Software installiert einen virtuellen COM-Port auf einem Windows-PC, der die Kommunikation zwischen PC und Pilot ONE über die USB-Schnittstelle ermöglicht. 
     
     
     
pySoftcheck – Python programming example
 
    
pySoftcheck is a sample application using the Python programming language. The programming sample facilitates training on the subject digital interface communication (Ethernet, RS232, USB) with Huber thermostats. The sample application requires the components Python 2.7.4 and pyserial 2.6 from the Runtime Package.

Software pySoftcheck
 
Manual

 
     
     
pyCommand – Simply try the communication
 
    
A graphical program to help support the Huber command sets. The software can be used to send individual commands to a Huber unit. This allows the communication to tried without having to write any software. The program can be used with the RS232, USB and Ethernet interfaces.

pyCommand

 
     
     
Runtime Package
 
    
This package installs runtime libraries which are required for some applications.

Huber Runtime Package

 
     
     
     
Lab View – Programming example
 
    
LabView programming example (Version 12.0 and higher) for controlling a Huber unit using PB commands.

LabView example

 
     
     
     
Service Software
 
    
Huber service software offers various functions for fault diagnosis. Operating parameters and performance data for Huber temperature control units can be recorded and evaluated by our service technicians. Please contact our technical support team if you are interested.

SpyService
 
InfoViewer
 
FLASHit
   
     
 



    Sales Contacts
    Catalogues & Brochures
    Newsroom & Exhibitions
    Case Studies
    3-2-2 Warranty Registration
    Subscribe to the Newsletter
    Quotation Request
    Distributors & Representatives
    Download Center
 
 
 
 
Peter Huber Kältemaschinenbau Home  |  Contact  |  Terms & Conditions  |  Imprint  |  Sitemap  Mobile Website